The VCP Cutting System provides an integrated solution for all your sampling, and short run production needs. An extensive selection of knives and pens are available to allow the system to intelligently and precisely cut, kiss cut , punch, and plot. The VCP cutting system interfaces with most design software, and allows you to complete the transition from time consuming manual sampling to high speed precision sampling, and also supports short run production needs as well.
Type | VCP 1311 | VCP 1713 | VCP 2011 | VCP 2516 |
Cutting Area | 1300mmX1100mm | 1700mmX1300mm | 2000mmX1100mm | 2500mmX1600mm |
Floor Area | 2100mmX1900mm | 2500mmX2100mm | 2800mmX1900mm | 3300mmX2400mm |
Length | 800mm-5000mm | |||
Width | 800mm-5000mm | |||
Speed | 1000mm/s | |||
Precision | 0.1mm | |||
Thickness | 50mm | |||
Data Format | DXF/HPGL/PDF/ISO | |||
Interface | Serial Port | |||
Media | Vacuum System | |||
Pump Power | 7.5KW/9KW/11KW | |||
Power | 220V/50HZ 380V/50HZ | |||
Operating Environment | Temperature 0℃-40℃ Humidity 20%-80%RH |
VVCUT EOT
Electronic Oscillating Knife for cutting soft and medium density materials, available with 1mm stroke.
VVCUT UCT
Universal Cutting Tool, used for through cutting materials with thicknesses up to 5mm at high speed at low cost.
VVCUT KCT
Kiss Cut Tool, for cutting vinyl, foil, films, thin paper, cardboard and other thin materials.
VVCUT RZ
The router operates at speeds up to 60, 000 RPM, and delivers solid performance on a wide range of rigid and flexible materials. Highly precise engraving capabilities include kiss cutting. Efficient dust extraction helps maintain a clean healthy work environment.
VVCUT DRT
Driven Rotary Tool for cutting textiles.
VVCUT V-CUT
The V-Cut tool is the perfect tool for producing complex structural designs from foam core or sandwich board Materials. The tool can be set for cutting 5 different angles for different cutting requests. The 5 different angles are 00,150,300,450 respectively.
VVCUT CTT
The CTT Tool is used for creasing corrugated materials. A selection of creasing tools allows perfect creasing in many substrates.
VVCUT POT
The Pneumatic Oscillating Tool is an air driven tool operating at high frequency to cut materials. Stroke is adjustable up to 8mm, and is capable of cutting hard dense materials. Blades are available to permit cutting materials up to 50mm thick.